The Specs, Straight Up
Here’s the deal with this touch screen heater: it’s a 400V, 2500W halogen lamp, built for the gritty reality of industrial control panels. It’s wrapped into a 300mm tube. That size is a lifesaver, honestly. It slips into tight spots without forcing you to rework your whole machine. At 400V, it throws off serious heat density, but it keeps the electrical draw on the control side clean and low. Just a heads-up, though—this isn’t something you casually plug in. You’ve got to size the supply wiring and contactor properly from the start.
What It’s Made Of
The core is a quartz envelope with a halogen cycle inside. That means the filament stays steady, even when it’s heated up and cooled down over and over. No drama. The reflective coating focuses all that heat forward, which is exactly what you need when you’re trying to warm a touch screen with barely any room to work with. And the R7s connector? It’s just a simple, two-pin setup. Makes the lamp a straightforward drop-in replacement. You wire it up fast, and it stays solid—way tougher than a fragile socket when things start vibrating.
Where It Shines (And What to Watch For)
This lamp is for the places where your touch screen heater needs to react instantly, hold a steady temperature, and just keep running, day and night, in a factory. That 2500W rating means it heats up fast. But here’s the catch—that same heat density will warm up the inside of your panel. So plan for ventilation and some thermal shielding. If you don’t, you’ll end up shortening the life of the electronics sitting right next to it.